Skip to main content
#
Questions? Call!

Ask A Question

Residential Energy Efficiency Blog

Monday, November 02 2020
5 Easy Projects to Save Energy at Home for 2020 & Into the Future

An internet search for ways to save energy at home usually results in good tips to save small amounts of energy, but they will likely not move the needle. 

For example, washing clothes in cold water and turning off ceiling fans in rooms where you are not spending time frequently are great points of advice, but if you want home energy saving results, try these five easy projects you can easily do yourself.

1. Seal Recessed Light Fixtures

The first thing you can do to save energy at home and reduce drafts is seal up you recessed lights in ceilings that are below the attic.  These common fixtures are secret gateways to the attic which means energy loss and comfort challenges.  Most older recessed lights have ventilation holes so that heat from the bulb can escape.  Energy customers with recessed lights typically have some of the biggest bills and comfort complaints.

 

save energy at home

Check out this photo I took of a group of recessed lights from the attic. 
I turned off the flash and my headlamp.

home energy saving tips

A recessed light as seen from inside of the house.

You can seal your recessed lights from the inside with an LED recessed light kit.
 

2. Seal Attic Floor Cracks, Holes and Gaps

Similar to the recessed light problem, there are other holes and cracks in the attic floor that will lead to the communication of air between the inside of the home and the attic, or outside.  Foam sealant can be purchased at the hardware store and it can be applied to the tops of walls, around light fixtures and to seal up holes drilled for electrical wires.  All of these voids contribute to a high bill and uncomfortable living space.

how to save energy at home

Wires run through the walls to hook up to electrical outlets and switches
creating pathways for air to connect between the inside and outside (attic).

how to save energy at home

A properly sealed top of the wall looking down at the attic floor.
 

3. Seal Accessible Leaky HVAC Ducts

Saving energy at home can be achieved when you put resources in the right place.  According to the EPA and other studies, the HVAC ducts in your home can be leaky enough to account for up to as much as 30% of a household's total energy loss. Sealing ducts is not something that needs to be done by a contractor.  This is a "weekend warrior" type of project that requires a little patience, a few materials and a little know how.  Sealing ducts near the air handler will also help you the most and those are usually the places that are most accessible.

save energy at home

Disconnected ducts are big energy wasters!

improve home energy

One way to fix leaky ducts is to use two-part spray foam.

seal ducts to save energy at home

Sealing ducts with mastic is another option to save energy at home
 

4. Seal and Insulate the Attic Hatch

If you want to save energy at home and improve comfort, be sure to think about all of the places that you have access to an attic around your house.  It is important to treat all of them.  Typically, the attic access points around a house are made from 1/4" plywood or drywall.  This is no way to separate the inside of your home from the attic (outside).  A few pieces of insulation and a 10' piece of weatherstripping can go a long way!

5 ways to save energy at home

Thermography of the hatch in this home shows that the are is problematic.

Save energy

5. Install a Chimney Balloon

If you have a fireplace, then you have another great way to save energy at home.  Most people keep the damper closed when the fireplace is not in use, but usually it is made of metal.  Chances are there is nothing stoping the flow of air through the chimney damper flap and out.  Using a very simple blow up type device can really help to move the needle and decrease energy usage and improve comfort.

Save home energy

A great way to save energy at home and improve comfort is to seal the chimney with an attic balloon.

Save energy at home

The attic ballon has a stem that can easily be access to blow up the device and create a nice seal in the chimney.

Save energy at home

 

Conclusion

There certainly are ways to save energy at home without having to lift a finger, but if you really want to see a decrease in your energy bill and an increase in your comfort level than you will have to put a little thought and effort into getting a few things done.  

 

Did these ideas help you save energy at home?  We want to know if you tried any of our solutions and how they worked out for you in the comments below!

 

Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

    Specialized Maryland Contractor
    • MHIC Licensed
    • Building Analyst Certified
    • Envelope Professional Certification
    • EPA Lead Renovator Certified


    Hometrust Remodeling is a licensed contractor specializing in a whole-house approach to home remodeling with an emphasis on educating our customers, providing energy efficient solutions, maintaining a network of high caliber technicians and using building science principles.

    Services & Service Areas

    SERVICE AREA COUNTIES
    Calvert County, Carroll County, Anne Arundel County, Baltimore County, Howard County, Montgomery County, Prince George's County

    Contact Us
    rss feedour facebook page

    MHIC License # 114593
    Approved BGE Energy Contractor
    Approved Pepco Contractor

     

    Hometrust Remodeling
    North Laurel, MD 20723
    301.957.6532
    info@hometrustremodeling.com
    Hometrust Remodeling


    Trust us to put all the pieces together right! 
    ©2020 Hometrust Remodeling | All Rights Reserved

    An Energy Auditor's Purpose 
    "Energy auditors visit residential buildings and talk to owners and residents.  They inspect, test, and measure to decide what energy-efficient retrofits are practical and cost effective." Residential Energy