Skip to main content
#
Questions? Call!

Residential Energy Efficiency Blog

Air Changes Per Hour, Energy Efficiency & Indoor Air Quality
Monday, September 28 2020

Building science principles are fascinating. When it comes to Maryland residential indoor air quality it all makes very good sense and Maryland homeowners should have basic knowledge of three important things around the house and how they are connected.


Three building science principles every homeowner should know

  • Air Changes per Hour
  • Energy Efficiency 
  • Indoor Air Quality

Read on to learn how they all connect to one another...

Air Changes Per Hour (ACH)

Air changes per hour (ACH) can be defined as the amount of times the volume of air inside your home changes with the outside air.  It is the house "breathing" in effect. If your house is calculated at 7 ACH then you can expect that on any given day and during any given hour, the inside air will exchange with outside air seven times. 

ACH in new construction homes has to be very low (3 or less).  New building codes for energy efficiency are making builders install energy efficient measures at the time of construction so that all of the typical leakage points are sealed before walls and ceilings go up which makes those areas very difficult to treat after they are in place (like in preexisting homes).

Energy Efficiency - Controlled vs. Uncontrolled Fresh Air

But, when we tighten up the envelope and don't allow the house to "breathe" as much we have to find solutions to create the right amount of ACH for healthy indoor air quality.  The key to this is to make sure the introduction of fresh air into the building is controlled so that less energy is consumed to maintain good indoor air quality (the right amount of fresh air) rather than allowing it to infiltrate uncontrolled causing heating and cooling systems to work much, much harder.

Indoor Air Quality - What is it Actually?

So in considering indoor air quality, it is important to know that measuring indoor air quality is NOT to measure the amount of particles in the air.  Indoor air quality is actually making sure that a building has enough fresh air and in a manner that is cost-effective.  Good indoor air quality also goes a long way towards sustainability and the longevity of the buildings structural components.

Get Your Score Today - Home Energy Audit - BGE or Pepco

The best way to check your indoor air quality is to get a BGE or Pepco energy audit with Hometrust Remodeling.  We are certified to test and calculate your indoor air quality as part of your comprehensive energy audit.

An comprehensive energy audit is a great way to have your home evaluated.  Measures can be prescribed in a way that will address indoor air quality as well as energy efficiency and comfort.  It is the whole house approach that ensures that you can have the best indoor air quality and a less drafty house at the same time.
 

What do you think about the indoor air quality in your house?  We want to hear in the comment section below!

Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

Building Performance Institute Certified
Building Performance Institute
Building Analysts
Envelope Professionals
BGE Approved Energy Contractor
Pepco Approved Energy Contractor

Having your home evaluated by Hometrust is a great way to identify your next home improvement project. 
Certifications earned through the Building Performance Institute demonstrate our ability to:

  • Find air leakage points around your home. 
  • Show you steps to improve energy efficiency.
  • Use science to guide improvements to comfort.  
  • Educate you how to tighten your building's shell. 
  • Learn about these opportunties before it is too late. 
  • Provide a unique perspective on your home's overall performance. 
  • Determine the root cause of any problems.
  • Assess current insulation effectiveness.
  • Measure air flow.
  • Evaluate windows, doors, siding and roofing.
  • Put you in complete control of the outcome.
    Specialized Maryland Contractor
    • MHIC Licensed
    • Building Analyst Certified
    • Envelope Professional Certification
    • EPA Lead Renovator Certified

    Hometrust Remodeling is a licensed contractor specializing in a whole-house approach to home remodeling with an emphasis on educating our customers, providing energy efficient solutions, maintaining a network of high caliber technicians and using building science principles.  As a result, we can effectively guide Maryland homeowners towards projects that satisfy comfort needs, aesthetics and value.

    Service Areas

    Calvert County, Carroll County, Anne Arundel County, Baltimore County, Howard County, Montgomery County, Prince George's County

    Contact Us
    our facebook page
    Hometrust Remodeling
    North Laurel, MD 20723
    301.957.6532
    info@hometrustremodeling.com
    Hometrust Remodeling


    Trust us to put all the pieces together right! 
    ©2020 Hometrust Remodeling | All Rights Reserved