Skip to main content
#
Schedule Online

Top Viewed Articles

Home Comfort Tips

I invite you to explore my YouTube channel, where you'll see first-hand how insulation looks in dark and mysterious attics, crawl spaces, and basements scattered across Maryland. Witness first-hand how we tackle the unique challenges found in these hidden spaces, and gain valuable knowledge on how to conquer your own house.

Insulation Video Library

Insulation Video Library

Like this article? 

Get two free guides:

Replacement Window Report &

Home Efficiency Report

Join a community!


Learn how to move the
home comfort needle!

Save Energy

Effective Tips

From a Certified Pro

Energy Auditor

 

Eric Gans
Certified Energy Auditor

Subscribe
Submit

Residential Comfort & Energy Efficiency

Home Comfort Newsletter Signup

* indicates required

I invite you to explore my YouTube channel, where you'll see first-hand some of the issues we are out there fixing.

Thursday, April 27 2023


Understanding the R-Value


It is important to measure insulation through a slightly different lens. Rather than focusing on which insulation is better, it is more important to achieve the recommended R-value for specific areas of your home's shell.

There are two important things to familiarize yourself with as it relates to R-value.


1. The R-Value in "Lay" Terms

We measure insulation by its R-value. 

Insulation has one job - to resist heat flow.  The higher the R-value, the better the insulation resists the transfer of heat. 

maryland insulation r-value

Attic insulation can have a huge impact on your comfort, energy bill, and HVAC performance.  A well-insulated attic can make an old heating and cooling system seem like new.

Attic insulation in Maryland homes is key to comfort each season.

Summer: Attic insulation keeps the hot attic air from getting inside.

Winter: Attic insulation prevents the warm inside air from escaping.  

The attic is the most important place to insulate first. Other areas should also be treated such as basements, overhangs, and crawl spaces.

 

2. Maryland Insulation R-Value Chart

You can use this later to compare to what you currently have.


BOUNDARY LOCATION
REQUIRED R-VALUE MARYLAND

 
Attic Flat
Ending R-value of 49 or as space allows
Attic Slope
Ending R-value of 38 or as space allows
Vertical Wall
(basement, crawl space, knee wall)
Ending R-value of 11 or greater
Crawl Space Ceiling
Ending R-value of 25 or as space allows
Below Cantilever
Ending R-value of 25 or as space allows
Rim Joist
(top of foundation wall in basement)
Ending R-value of 19 or greater


Determine what Type of Insulation You HaveMaryland Attic Insulation Types

Different attic insulation materials and levels yield wide-ranging R-values. 

So, it is first important to determine the type of insulation that is in your attic. 

Typical Insulation Materials Found in Maryland Attics

  • Fiberglass batts
  • Loose-fill fiberglass
  • Loose-fill cellulose
  • Mineral wool
  • Two-part spray foam 


Identifying the Most Common Maryland Insulation Types
 

Cellulose Loose Fill

General Characteristics

  • Grey in color
  • More dusty and clingy than other materials
  • Has bits of newspaper in it
  • Good fire/mold retarder w/ additives
     

loose cellulose insulation r-value


Rolled Fiberglass Batt Insulation

General Characteristics

  • Typically referred to as batt insulation
  • Has the kraft paper or aluminum foil on one side
  • Recognizable due to the "Pink Panther" commercials
  • Must be installed flawlessly (unforgiving)
  • Low R-value per inch if not installed properly
     

fiberglass batt insulation r-value 

 

Maryland Attic Insulation Company

 


Fiberglass Loose Fill

General Characteristics

  • Typically white shreds, pink squares or yellow shreds
  • Much less dusty
  • Lower cold weather performance than cellulose
     

Insulation code Maryland

Home Insulation Contractor Maryland


Determine Your Attic Insulation's Condition

The condition of the existing insulation in an attic is also important. Obtaining the information will assist in generating a reliable return on investment reporting. Current conditions can also reveal clues about future comfort gains.

R-value can be misleading if several factors are not met:

Your insulation should get a rating of "poor", "moderate" or "well" insulated.
 

Attic Insulation in Poor Condition

Insulation with large gaps and voids.  Missing insulation greater than 2% of the insulated area.

Example of Poor Insulation Coverage

 

 

Attic Insulation in Moderate Condition

Insulation with defects and gaps around wiring, electrical outlets, plumbing, and other intrusions. Rounded edges or "shouldered". The amount of fill is incomplete, but rarely dips less than 30% of the intended thickness. Gaps and spaces running clear through the insulation should be no more than 2% of the insulated area.

moderate insulation coverege

 

 

Well Insulated Attic Characteristics

The insulation has no large gaps or voids around obstructions. The insulation appears to fit in any cavity side-to-side and top-to-bottom. The insulation appears to be around wiring and other services in the area.

a well insulated attic diagram
 


Different Insulation Types & Conditions = Different R-Values

The values for the corresponding condition of your attic insulation can be multiplied by the number of inches you have to see where your attic falls on the scale.

 

  • Loose Fill Cellulose
    New: 3.60 R-value per inch
    Existing Well: 3.60
    Existing Moderate: 3.13 R-value per inch
    (Example: 6" = R19; 10" = R31)
    Existing Poor: 2.7 R-value per inch

     
  • Fiberglass Batt Insulation
    New: 3.14 R-value per inch
    Existing Well: 2.67
    Existing Moderate: 2.10 R-value per inch
    (Example: 6" = R13; 10" = R21)
    Existing Poor: 1.26 R-value per Inch

     
  • Loose Fill Fiberglass
    New: 3.14 R-value per inch
    Existing Well: 3.14
    Existing Moderate: 2.73 R-value Per inch
    (Example: 6" = R16; 10" = R27) 
    Existing Poor: 2.36

How Much Does Insulation Cost in Maryland?

Home Energy Audit Maryland

 

 

Watch a uniformly blown cellulose attic insulation job in progress!

 

 

 

 

 

 

 

 

 

 

 

 

Maryland Insulation Rebates


How the Insulation Program Works

Maryland Utilities (BGE & Pepco) offer a portfolio of programs promoting energy efficiency and conservation, including rebates, education, and services.  The program is designed around a consultative approach.

Air sealing and insulation are considered the most important measures to complete to achieve energy efficiency - before windows, doors, and replacing older HVAC.

The initial qualifier for rebates is to get a home energy audit. 

LEARN MORE

BGE CUSTOMERS
PEPCO CUSTOMERS

 

Maryland Residents Learn More About the Inflation Reduction Act Here
 

 

 

Take the Next Step

Schedule Now!

Don't hesitate. Schedule online. Only $100 in the end. 
 

Hometrust offers the official Maryland home energy audit offered through BGE and Pepco in coordination with ENERGY STAR
SCHEDULER

 

Get a home energy audit & get questions answered such as:

Why is the room on the front of the house colder?
Do you have enough insulation?
Why is it so stuffy upstairs during the summer?
Should I remove old insulation from my attic?
Why does my HVAC run all of the time?
Is spray foam insulation the best solution for my home?
Why are my new windows feeling drafty?
Do my walls have insulation?


 

Wanna know more about the home energy audit process?
 

maryland home energy auditor eric gans

Energy Audit Guides

-2023 BGE Energy Audit-

-2023 Pepco Energy Audit-

 

Do you need an energy audit?

Check your house for any of these 5 signs...
 

A home energy audit is the GPS of home improvements...

home energy audits provide guidance towards making good home improvement decisions

Turn-by-turn directions to better comfort & energy efficiency.

Schedule yours today!


 

Back to Top

 

Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

Insulation Video Library

Insulation Video Library

    Specialized Maryland Contractor

     

    • MHIC Licensed
    • Building Analyst Certified
    • Envelope Professional Certification
    • EPA Lead Renovator Certified
    • YouTube Learning Channel
       

     

    Our mission is to help Maryland homeowners create a more comfortable home and save energy. We achieve this by applying building science principles and modern air sealing and insulating techniques.


    Google Reviews

    Services & Service Areas

    SERVICE AREA COUNTIES
    Anne Arundel County, Baltimore County, Baltimore City, Carroll County, Harford County, Howard County, Montgomery County, Prince George's County

     

     

    hometrust is an energy star partner

    Contact Us
    our facebook page youtube

    MHIC License # 114593
    Approved BGE Energy Contractor
    Approved Pepco Energy Contractor

     

    MHIC 114593
    8345 Sperry Court
    Laurel, MD 20723
    301.957.6532
    info@hometrustremodeling.com

     

    Hometrust Remodeling

    Proudly working in BGE & Pepco's Home Performance w/ ENERGY STAR program in Maryland to deliver whole-house energy savings to improve comfort & help protect the environment.
    2024 Hometrust Remodeling | All Rights Reserved

    An Energy Auditor's Purpose 
    "Energy auditors visit residential buildings and talk to owners and residents.  They inspect, test, and measure to decide what energy-efficient retrofits are practical and cost-effective." Residential Energy